PECAT® Garage Entry Bends
BY Series
Body and Sleeve: Steel.
Outlet pipe cover: PE.
Inlet pipe: PE to GIS/PL2-2.
Sleeve Seal: EPDM Rubber.
Corrosion protection: PE & Zinc plate.
Garage Entry Bends are supplied suitable for site jointing by electro fusion only.
No adjustment to Body lengths are possible, see table below for available length options. The PE inlet pipe can be shortened on site if required.
Please refer to the PE fitting manufacturer’s instructions for details on electro fusion welding procedures.
Meets GIS/PL3:2014 requirements, BSI Kite Mark accredited – KM535530.
Maximum Operating Pressure (MOP) = 2.0 Bar.
25mm SDR11 x ¾” to 63mm SDR11 x 2”.
The Product Data tables are filterable and searchable to help you find the products you are looking for faster.
Just click the column header that you want to filter or sort by. Then click 
to add a product to the enquiry basket.
| Part Number | PE Size Ø | PE Size SDR | PE Size Grade | PE Size Length | Outlet Size | Outlet Type | Horizontal Lengths | Vertical Lengths | Enquiry |
|---|---|---|---|---|---|---|---|---|---|
| BY2000 | 20 | 9 | PE80 | 0.5 | 3/4" | MBSPT | 0.5 | 0.5 | |
| BY2001 | 25 | 11 | PE80 | 0.5 | 3/4" | MBSPT | 0.5 | 0.5 | |
| BY2002 | 25 | 11 | PE80 | 0.5 | 3/4" | MBSPT | 1.0 | 0.5 | |
| BY2003 | 25 | 11 | PE80 | 0.5 | 3/4" | FBSPT | 1.0 | 0.5 | |
| BY2004 | 32 | 11 | PE80 | 0.5 | 1" | MBSPT | 0.5 | 0.5 | |
| BY2005 | 32 | 11 | PE80 | 0.5 | 1" | MBSPT | 1.0 | 0.5 | |
| BY2006 | 32 | 11 | PE100 | 1.1 | 1" | FBSPT | 0.9 | 1.25 | |
| BY2007 | 32 | 11 | PE100 | 0.5 | 1" | FBSPT | 0.8 | 1.15 | |
| BY2008 | 63 | 11 | PE80 | 1.1 | 2" | FBSPT | 0.8 | 1.25 | |
| BY2009 | 63 | 11 | PE80 | 0.5 | 2" | FBSPT | 0.8 | 0.8 | |
| BY2010 | 32 | 11 | PE80 | 0.4 | 1" | FBSPT | 0.8 | 1.25 | |
| BY2014 | 63 | 11 | PE80 | 0.5 | 2" | FBSPT | 0.8 | 1.25 | |
| BY2015 | 63 | 11 | PE80 | 1.2 | 2" | MBSPT | 0.8 | 1.25 |
